Machine Vise NC H

hydraulically operated, single acting


  • steel base resistant to deformation
  • hydraulic clamping force build-up
  • hardened and ground guideways
  • extensive range of jaws
  • easy clamping range adjustment by quick socket pin adjustment
  • minimum set-up times
  • tapped hole in the fixed jaw for workpiece stop
  • clamping edge for clamping claws
  • quick cleaning by simple removal of the slide
  • longitudinal and crosswise keyways 20 H7 for quick positioning in accordance with NC requirements
  • different overall lengths for optimum adaptation to the machine table and the interfering edges in the machining center

The workholding systems of the series NC can be quickly adapted to various clamping ranges because of their socket pin adjustment. By means of the longitudinal and crosswise keyways 20 H7, the NC can be positioned quickly and in accordance with NC requirements. Step jaw inserts are available as accessories, to extend the clamping range. The workholding system can be easily and quickly cleaned by pulling out the socket pin and removing the clamping slide from the base. Available in 3 jaw widths listed below:

NC 100 H
Jaw width: 100 mm
Clamping force: 25 kN at 350 bar
Clamping stroke: 5 mm
NC 125 H
Jaw width: 125 mm
Clamping force: 40 kN at 350 bar
Clamping stroke: 5 mm
NC 160 H
Jaw width: 160 mm
Clamping force: 63 kN at 350 bar
Clamping stroke: 7 mm

Document Title Language File Type