• My requests (0)
    You do not currently have any products added to your request.
    All requests
Search
All results
Contact
(636) 386-8022 Call now
[email protected] Contact now
Series
2.2403

Wedge Clamps for Tapered Clamping Edge

double acting, max. clamping force 25 to 630 kN
with safety step, without and with position monitoring
Wedge Clamps for Tapered Clamping Edge
Downloads
Catalogue sheet
USESFR
Operating instructions
ENFR
Information Series
Description
2.2403 Wedge clamps

with safety step, without and with position monitoring

The clamping bolt of this version has an additional support surface parallel to the clamping edge. In the case of pressure drop (machine failure or down time) the upper die can be lowered to the safety step and safely held.

Safety steps
  1. without safety step
     
  2. with safety step
     
  3. with form-fit safety step
Accessories (9)
Item no. CAD data Description
Item no.
3300285
CAD data
Description
Drill bushing DIN 179 A 12 x 12 mm *as per data sheet B1.738
Item no.
3300287
CAD data
Description
Drill bushing DIN 179 A 17 x 16 mm as per data sheet B1.738
Item no.
3300288
CAD data
Description
Drill bushing DIN 179 A 21 x 20 mm as per data sheet B1.738
Item no.
3300289
CAD data
Description
Drill bushing DIN 179 A 26 x 20 mm as per data sheet B1.738
Item no.
3300420
CAD data
Description
Drill bushing DIN 179 32 x 25 mm *as per catalogue sheet WZ 2.2401
Item no.
3300430
CAD data
Description
Drill bushing DIN 179 38 x 30 mm *as per catalogue sheet WZ 2.2401
Item no.
3300440
CAD data
Description
Drill bushing DIN 179 44 x 30 mm *as per catalogue sheet WZ 2.2401
Item no.
5700013
CAD data
/
Description
Connecting line with screw coupling 5-pole cable length 5 m *as per catalogue sheet WZ 4.2150
Item no.
5700014
CAD data
/
Description
Connecting line with screw coupling 5-pole cable length 10 m *as per catalogue sheet WZ 4.2150
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.