• My requests (0)
    You do not currently have any products added to your request.
    All requests
Search
All results
Contact
(636) 386-8022 Call now
[email protected] Contact now
Product
V1SAALBP5R030H025WXXX0NE
Swing clamp without swing stroke
Swing clamp without swing stroke
Downloads
Catalogue sheet
USESFR
Operating instructions
CAD data

Further information can be found on the pages of the series.

Show product series
Request product
Count
Article description
Swing clamp without swing stroke top flange, reinforced swing mechanism double acting, size 2 piston/rod Ø: 36/25 mm pulling force (250 bar): 13.1 kN clamping arm mount: pendulum eye swing angle 30° cw clamping stroke 25.0 mm, seals NBR angle of clamping position: 0-175° selectable max. 250 bar, as per data sheet B1.8807
Technical data
  • body design: top flange
  • size: 2
  • clamping arm seat: pendulum eye
  • clamping stroke [mm]: 25
  • total stroke [mm]: 25
  • swing angle [°]: 30
  • swing direction: cw
  • angle of clamping position W [°]: 0-175
  • functioning: double acting
  • piston diameter [mm]: 36
  • rod diameter [mm]: 25
  • max. pulling force [kN]: 13.1
  • max. operating pressure [bar]: 250
  • seals: NBR
  • hydraulic ports: pipe thread and manifold connection with O-ring
  • swing mechanism: reinforced
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.