Hollow cylinders

version with internal thread
single and double acting
max. operating pressure 500 bar

Downloads

Catalogue sheet

US ES FR

Operating instructions

Request product

Check Pricing and Availability

Go to Carrlane.com

Information Series

Description

B 1.7441 Hollow-piston cylinders

Hollow-piston cylinders are especially suitable for clamping workpieces that have a through hole or opening.

The piston has a through hole with an internal thread.
In connection with a standard tie rod and C-washer combination a variety of applications is possible (see application examples).
After the workpiece has been inserted and centred by hand, the C-washer can be pushed onto the tie rod and then clamped hydraulically.
Compared to mechanical clamping with clamping screws this has significant advantages:

The clamping force can be hydraulically adjusted with precision and high repetitive accuracy
The operator can fully concentrate on the correct position of the workpiece
A significant time saving

Products (12)

Number

Item no.	CAD data	stroke [mm]	functioning	piston diameter [mm]	max. force to push [kN]
Item no. 1752004	CAD data	stroke [mm] 6	functioning single acting with spring return	piston diameter [mm] 20	max. force to push [kN] -	Properties
Item no. 1752023	CAD data	stroke [mm] 10	functioning double acting	piston diameter [mm] 20	max. force to push [kN] 10	Properties
Item no. 1754004	CAD data	stroke [mm] 8	functioning single acting with spring return	piston diameter [mm] 32	max. force to push [kN] -	Properties
Item no. 1754023	CAD data	stroke [mm] 12	functioning double acting	piston diameter [mm] 32	max. force to push [kN] 24	Properties
Item no. 1755004	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 40	max. force to push [kN] -	Properties
Item no. 1755023	CAD data	stroke [mm] 16	functioning double acting	piston diameter [mm] 40	max. force to push [kN] 38	Properties
Item no. 1756004	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 50	max. force to push [kN] -	Properties
Item no. 1756023	CAD data	stroke [mm] 20	functioning double acting	piston diameter [mm] 50	max. force to push [kN] 57.9	Properties
Item no. 1757004	CAD data	stroke [mm] 16	functioning single acting with spring return	piston diameter [mm] 63	max. force to push [kN] -	Properties
Item no. 1757023	CAD data	stroke [mm] 32	functioning double acting	piston diameter [mm] 63	max. force to push [kN] 93	Properties

Accessories (12)

Number

Item no.	CAD data	Description
Item no. 3300054	CAD data /	Description
Item no. 3300134	CAD data	Description Lock nut DIN 1804 M120 x 2 mm as per data sheet B1.7441
Item no. 3300277	CAD data /	Description
Item no. 3300324	CAD data	Description Flange nut DIN 1804 M48 x 1,5 mm see page B1.309
Item no. 3300411	CAD data	Description Flange nut M60 x 1,5 mm W black oxided see page B1.460
Item no. 3300412	CAD data	Description Flange nut DIN 1804 M90 x 2 mm see page B1.309
Item no. 3300673	CAD data	Description Flange nut DIN 1804 M75 x 1,5 mm see page B1.309
Item no. 3300699	CAD data	Description Flange nut DIN 1804 M40 x 1,5 mm see page B1.309
Item no. 3301263	CAD data	Description Socket head cap screw M8 x 20 mm, 8.8, galvanized as per data sheet B1.7441
Item no. 3456310	CAD data	Description Flange for hollow-piston cylinder 1756-XXX Ø 105 x 20 mm as per data sheet B1.7441

Application examples

Application example 1

Hollow-piston cylinders in combination with push-pull bolt and “C”-washer can be used advantageously in many cases to clamp workpieces with centre openings.

Application example 2

On the shown machine table, the workpiece is clamped with a hollow-piston cylinder and additionally supported with a work support, controlled by a sequence valve.
The support plunger of the work support is retracted in off-position to facilitate workpiece loading. Contact is effected by means of spring force. The savings in workpiece exchange time, compared to a mechanical clamping system amounts to 58%.

Application example 3

This clamping fixture is for milling operation on a light extruded rail. Workholding by means of hollow-piston cylinders in individual clamping stations mounted on a base plate. Positioning and support of the rail is effected with two longitudinal members matching the cross section of the rail.