May 12th 2020
Fabtech Mexico 2020
May 12th-14th 2020. The event will be held at the Centro Citibanamex jointly with the already established AWS Weldmex, Metalform Mexico and Coatech México. Please join us at booth #120 and check out all our quick die change solutions by Hilma.
The combined event continues to be the primary gathering for leading metal manufacturers in Mexico and will bring together 575 exhibitors and cover more than 140,000 net square feet of show floor. Over 13,000 attendees from Mexico and South America will converge on the Centro Citibanamex to find solutions, network, learn and experience first-hand the latest innovations in the metal forming, fabricating, welding and finishing industries. For more information click here!
|
Wedge Clamps
|
Wedge clamps come in a variety of styles allowing customers to configure clamping arrangements using a range of options from cooling circuits to sequence valve controls. The wedge clamping elements, with single or dual action, exert forces of 3 to 69 US tons and have a maximum temperature rating of 570F. The clamps can be actuated via hydraulic, electric or springs. Position sensors are available to verify the extended / clamped or retracted / unclamped positions. Learn More |
|
Die Lifters
|
Hydraulic die lifters from Hilma provide a roller surface to easily roll dies in and out during the die change process. The dies can be moved in a linear movement, forwards or backwards, and are for medium to heavy loads.
|
|
Carrying Console
|
Hilma’s carrying consoles allow a safe effort and time-saving change of heavy dies on the press bed. The carrying consoles are hung in the hooks on the die change side of the press. the hooks are supplied with the consoles.
|
|
Sliding Clamp
|
Hilma’s sliding clamp is positioned manually in the T-slots of the press ram or bed. It clamps on the edge of the die by applying hydraulic pressure to the piston and unclamps by spring force. The “compact” sliding clamp consists of a hydraulic clamping block which will be attached with two screws to a T-slot adapter. The clamping block can also be purchased separately to be directly mounted without a T-slot adapter.
|
|
Hollow Piston Cylinder
|
Hilma’s Hollow Piston Cylinder is manually placed on the clamping edge of the die. The die is clamped by applying hydraulic pressure to the piston and mechanically unclamped by spring return. The T-bolt clamps the die on the clamping surface of the press ram or bed. Includes Spherical disk for optimum adaptation to the clamping surface, and is threaded for inch T-bolts.
|
