2.2403
Wedge Clamp
For Tapered clamping edge, with safety step
Features
- Safety step for the support of the upper die, if there is a pressure loss
- available in sizes between 25 kN and 630 kN (1,250kN on request)
- high functional reliability ensured by position monitoring and an automatic cycle
- rugged and well-proven clamping element with high degree of safety and long service life
View Size Chart
This design features a clamping bolt with an additional accommodation surface, which is parallel to the clamping edge. Should the pressure drop (machine failure or standstill), the upper die will lower onto the safety step where it is safely held in position. Resistant to temperatures of up to 160¡C (higher temperatures on request).
| Max. clamp force (kN) | 25 | 50 | 100 | 160 | 250 | 400 | 630 |
| Pressure (bar) | 350 | 275 | 350 | 350 | 350 | 350 | 350 |
| Stroke (mm) | 20 | 25 | 25 | 30 | 32 | 40 | 40 |
| Hydraulic Connection | G 1/4 | G 1/4 | G 1/4 | G 1/2 | G 1/2 | G 1/2 | G 1/2 |
| Length (mm) | 122 | 157 | 190 | 227 | 267 | 310 | 375 |
| Width (mm) | 65 | 85 | 100 | 125 | 160 | 200 | 230 |
| Height (mm) | 48 | 65 | 80 | 105 | 125 | 160 | 190 |
| Weight (kg) | 2.54 | 6.10 | 11.10 | 21.30 | 40.30 | 74.20 | 125.70 |
| Part no. | HCR-8.2403.1000 Wedge Clamp | HCR-8.2404.1000 Wedge Clamp | HCR-8.2405.1000 Wedge Clamp | HCR-8.2406.1000 Wedge Clamp | HCR-8.2407.1000 Wedge Clamp | HCR-8.2408.1000 Wedge Clamp | HCR-8.2409.1000 Wedge Clamp |
|---|---|---|---|---|---|---|---|
| Accessory No. | HCR-3300-285 12 x 12 mm Bushing | HCR-3300-287 17 x 16 mm Bushing | HCR-3300-288 21 x 20 mm Bushing | HCR-3300-289 26 x 20 mm Bushing | HCR-3300-420 32 x 25 mm Bushing | HCR-3300-430 38 x 30 mm Bushing | HCR-3300-440 44 x 30 mm Bushing |
Safety Step