Wedge Clamp
2.2400

Wedge Clamp

Double-Acting, for Dies with Tapered Clamping Edge

Specs & Information

Features

  • without position monitoring
  • available in sizes between 25 kN and 630 kN
  • high functional reliability ensured by position monitoring and an automatic cycle
  • rugged and well-proven clamping element with high degree of safety and long service life
View Size Chart
2.24004_Wedge_Clamp_Saftey_Strap

Double-acting wedge clamp for clamping dies on a press bed or slide or for clamping dies in injection molding machines. The wedge clamp consists of a hydraulic block cylinder and a piston guided in a housing. The clamping bolt, designed without proximity switch, is provided with 20¡ bevel to clamp on the tapered clamping surface of the die. Based on the internal design of the wedge clamp and the 20¡ clamping bevel the system is providing internal friction. For reasons of safety and in order to comply with the specifications of the ÔMachineryÕ directive no. ML98/37/EC, hydraulic pressure must always be maintained. When upper dies are clamped by wedge clamps, they must be secured mechanically when maintenance work is carried out.

Max. clamp force (kN) 25 50 100 160 250 400
Pressure (bar) 350 275 350 350 350 350
Stroke (mm) 20 25 25 30 32 40
Hydraulic Connection G 1/4 G 1/4 G 1/4 G 1/2 G 1/2 G 1/2
Length (mm) 122 157 190 227 267 310
Width (mm) 65 85 100 125 160 200
Height (mm) 48 65 80 105 125 160
Weight (kg) 2.40 5.80 10.60 21.0 40.0 74.00
Part no. HCR-4604-620 Wedge Clamp HCR-4604-621 Wedge Clamp HCR-4604-622 Wedge Clamp HCR-4604-623 Wedge Clamp HCR-4604-634 Wedge Clamp HCR-4604-635 Wedge Clamp
Accessory No. HCR-3300-285 12 x 12 mm Bushing HCR-3300-287 17 x 16 mm Bushing HCR-3300-288 21 x 20 mm Bushing HCR-3300-289 26 x 20 mm Bushing HCR-3300-420 32 x 25 mm Bushing HCR-3300-430 38 x 30 mm Bushing
Document Title Language File Type