7.0800.US
Valve Packages
Manual and solenoid operated
Features
- Solenoid valves can be operated via P.L.C. system or manual switch
- Zero-leakage poppet design with built-in check valve
- Very compact
- Suitable for new or existing press room equipment
View Size Chart
The clamping pressure, as supplied from a separate pump unit and controlled by one of these integrated valve packages, can actuate single or double-acting clamp circuits in the bed and ram. Safety pressure switch in each clamp line provides a signal to the press enable circuit in the event of a pressure loss. The low pressure die lifter circuit provides an adjustable pressure reducer with circuit relief valve. The high pressure die lifter circuit, operates at the clamp system pressure and includes a circuit relief valve. This safety valve prevents the rollblocks from being overloaded. Specials available on request.
| Pressure (bar) | 400 |
| Hydraulic Connection | G1/4 BSPP |
| Part no. | HCR-VP-S2001-1 2 double acting clamp circuits, 1 high pressure die lift circuit |
|---|
