Threaded-Body Cylinders w/ Locking Pistons
B1.711

Threaded-Body Cylinders w/ Locking Pistons

max. operating pressure 500 bar, single acting

Specs & Information

Features

  • available in one body size, M30x1.5
  • particularly suitable for clamping thin-walled workpieces with minimum deformation, as well as for floating clamping.
  • long plunger guide ensures excellent reliability and durability.

     

               Check Price & Availability on CarrLane.com   

     

B1.711

This Threaded-Body Push Clamp incorporates our exclusive “Locking Support Plunger”, to provide clamping and support in one element. Threaded-body clamps provide considerable force in small size and can be placed very close together, especially when manifold mounted. Clamps can be screwed all the way down to their hex flats, or installed at partial depth. Long plunger guide ensures excellent reliability and durability.

Clamps with locking support plungers exert relatively little clamping force but provide a high support force in the opposite direction. They are particularly suitable for clamping thin-walled workpieces with minimum deformation, as well as for floating clamping.
Clamping Action

Applying fluid pressure advances the piston, which simultaneously expands like a work support to lock inside the cylinder body. Spring return retracts the piston for loading/unloading.

As a work support, this clamp has an elastic deformation of only .000036″ per 100 lbs machining force.
Mounting & Fluid Supply 

Install clamp directly into a flat-bottom tapped hole in the fixture – see drawings for hole-preparation instructions. Hydraulic sealing is accomplished by a Sealing Washer (furnished) placed directly underneath the clamp. Tighten clamp to recommended seating torque.

Fluid passages must be drilled as shown in the drawings. Do not use NPT fittings.
Document Title Language File Type