High Pressure Spindle

Mechanical with integral wedge system


  • suitable for retrofit
  • temperature resistance up to 250 Degrees C
  • compact design allows for multiple clamping
  • high clamping force with low torque
  • self-locking by patented wedge system
  • individually usable
View Size Chart

Following the manual positioning of the high-pressure spindle against the clamping edge, the wedge system is brought into action by turning the hexagon nut (SW1). The clamping force is then transmitted axially to the clamping point. This required clamping force is achieved by selecting the appropriate torque on the torque wrench (see force torque diagram). For unclamping, proceed in the reverse order.

Max. clamp force (kN) 40 80 120
Tightening torque (Nm) 45 90 140
Stroke (mm) 1.5 2.2 2.5
Overall Diameter (mm) 36 48 64
Height (mm) 91 108 128
Weight (kg) 0.50 2.00 2.50
Part no. HCR-2272-210 Mech. Spindle HCR-2273-210 Mech. Spindle HCR-2274-210 Mech. Spindle
Document Title Language File Type