Fixture clamp with concentric clamping
max. clamping force 6.5 kN
- very compact design
- high rigidity
- repetitive accuracy ±0.02 mm
- retention force higher than clamping force
- 2 sizes
- strokes 2 x 5 and 2 x 8 mm
- double-acting function
- fixtures without tubes possible
- port for central lubrication
- mounting position: variable
The fixture clamps are used for machining dimensionally stable workpieces in single or multiple clamping fixtures. Due to their compact design, they can be arranged in a very limited space. Fixture clamps are especially suitable for series manufacturing in automated mode. The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.
The fixture clamp is only suitable for exterior clamping. Lubricate at the latest after 500 clamping cycles the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece. Max. operating temperature 80 °C.
|Document Title||Language||File Type|
Concentric clamping of 8 flanges on a rotary indexing fixture.