6.2212
Clamping Block
Mechanical with integral high-pressure spindle
Features
- high clamping force with low torque
- compensates for large clamping edge tolerances
- self-locking by patented wedge system
- individually usable
- clamping block with high-pressure spindle
- mounted on spacer ledges
View Size Chart
The high-pressure spindle is manually screwed against the die clamping edge. The clamping force is built up by turning the hexagon nut (SW 1) in a clockwise direction using a torque wrench. The clamping force achieved depends on the tightening torque selected with the torque wrench.
| Max. clamp force (kN) | 40 | 80 |
| Stroke (mm) | 1.5 | 2.2 |
| Length (mm) | 104 | 126 |
| Width (mm) | 65 | 80 |
| Height (mm) | 91 | 111 |
| Weight (kg) | 2.30 | 4.00 |
| Part no. | HCR-2212-111 Clamping Block - Mech | HCR-2213-111 Clamping Block - Mech |
|---|
Clamping block with high-pressure spindle, mounted on spacer ledges