The carrying consoles are hung in the hooks on the die changing side of the press. The hooks are supplied with the consoles. The consoles are used as a pair. Their size must be selected to suit the highest die weight. The die is loaded onto the consoles using a crane or a forklift truck. The carrying rollers consist of high-strength hardened needle bearings. The end stop can be bypassed in one direction. The surface is provided with a shock-resistant coating in RAL 1004, golden yellow. Hanging consoles may be used for several presses. In this case, an additional set of hooks is required.
| Max. clamp force (kN) | 30 | 30 | 10 | 20 | 20 | 5 | 10 | 10 | 20 |
| Length (mm) | 840 | 1290 | 1040 | 840 | 1290 | 540 | 540 | 840 | 1040 |
| Width (mm) | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 |
| Height (mm) | 400 | 500 | 250 | 250 | 350 | 120 | 150 | 180 | 300 |
| Weight (kg) | 6.00 | 106.61 | 47.91 | 40.71 | 8.00 | 22.87 | 25.47 | 38.86 | 56.59 |
| Part no. | HCR-8.1835.0008 Console - hanging | HCR-8.1835.0010 Console - hanging | HCR-8.1835.0104 Console - hanging | HCR-8.1835.0105 Console - hanging | HCR-8.1835.0107 Console - hanging | HCR-8.1835.0001 Console - hanging | HCR-8.1835.0002 Console - hanging | HCR-8.1835.0003 Console - hanging | HCR-8.1835.0006 Console - hanging |
|---|
