Block Cylinders S
double acting, max. operating pressure 250 bar and 500 bar use as punching cylinder max. 250 bar
Features
- can withstand high mechanical and thermal loads
- equipped with the latest sealing technology
- universally used for all linear movements with high force requirements and very small dimensions
Hydraulic block cylinders are universally used for all linear movements with high force requirements and very small dimensions. The block cylinder S can withstand high mechanical and thermal loads. Its preferred applications are:
• Punching*
• Deburring
• Forming such as bending, riveting, stamping
• In mold making for actuating core pullers and slides
• In automatic manufacturing systems
The block cylinders S are equipped with the latest sealing technology so that optimally adapted versions are available depending on the operating pressure (250 or 500 bar), temperature, and hydraulic fluid. At the piston rod outlet, the dirt wipers are largely protected against swarf by the recessed installation. All series are equipped with piston and rod guide rings which absorb side loads between the sliding components and prevent direct metal contact. This increases the service life and minimizes leakage. The admissible piston side load depends on the stroke and can be taken from the diagrams on page 5. The internal piston stops are of sturdy design. The admissible piston speed depends on the mass fixed to the piston and can be read in the diagram on page 5.
