3.2206.US
Angular Clamp
Single-acting, Inch/ASA T-Slot
Features
- high clamping force in combination with small size and low weight
- t-slot adapter for easy integration
- suitable for small clamping edges
- t-slot 13/16 and 1-1/16 inch are available
- no need for die standardization (width and depth)
View Size Chart
The angular clamp is positioned manually in the T-slots of the press ram or bed. It clamps on the edge of the die by applying hydraulic pressure to the piston and unclamps by spring force. The angular clamp consists of a hydraulic clamping block which will be attached with two screws to a T-slot adapter. The clamping block can also be purchased separately to be directly mounted without a T-slot adapter. The angular clamp is suitable where space is limited.
| T-Slot Size (mm) | 13/16 | 13/16 | 1-1/16 | 1-1/16 | 1-1/16 |
| Max. clamp force (kN) | 40 | 66 | 40 | 66 | 110 |
| Pressure (bar) | 400 | 400 | 400 | 400 | 400 |
| Stroke (mm) | 5.5 | 6.0 | 5.5 | 6.0 | 6.0 |
| Hydraulic Connection | G 1/4 | G 1/4 | G 1/4 | G-1/4 | G 1/4 |
| Length (mm) | 101 | 118 | 101 | 118 | 147 |
| Width (mm) | 75 | 90 | 75 | 90 | 120 |
| Part no. | HCR-8.2312.1302.FXXXX Angular Clamp & 13/16 T-Slot Adapt | HCR-8.2314.1311.FXXXX Angular Clamp & 13/16 T-Slot Adapter | HCR-8.2312.1702.FXXXX Angular Clamp & 1-1/16 T-Slot Adapt | HCR-8.2314.1711.FXXXX Angular Clamp & 1-1/16 T-Slot Adapt | HCR-8.2315.1711.FXXXX Angular Clamp & 1-1/16 T-Slot Adapt |
|---|
