Need Help?
(636) 386-8022 (636) 386-8022
Contact us
0

Quick-Die Hydraulic Clamping Elements (Stationary)

ROEMHELD stationary quick-die change hydraulic clamps are designed to fasten to the bed/ram of your press. They are selected when the dies have the same footprint. Stationary clamps are bolted to the press bed or ram and require no human interaction.

Within this section of the ROEMHELD catalog, you will find a variety of hydraulic clamping system components including single-acting hollow piston or spring clamping cylinders, single and double-acting clamping bars, wedge clamps, and much more. These products are designed to provide industry-leading safety, service life, and maximum clamping force. Explore the full line of Roemheld quick die change hydraulic clamps below.

Request a Quote

Arch Clamps

for Flat Clamping Edge

WZ 2.2503

Hollow Piston Cylinder

Single-acting, without spring return

2.1300

Hollow Piston Cylinder

Single-acting, with spring return

2.1320

Hollow Piston Cylinder

Short-stroke, single-acting

2.1330

Spring Clamping Cylinder

Pulling, with hydraulic return

2.1400

Double-T Clamping Bar

Double-acting lifting and clamping

2.1832

Swivel and Pull Clamp

Double-Acting

2.1833

Clamping Bar

Single-acting with spring return, low profile

2.2095

Clamping Bar

Single-acting with spring return

2.2096

Clamping Bar

Double-acting

2.2097

Pivot and Pull Clamp

Double-acting, Max. 400 bar

2.2185

Swing Sink Clamp

Double-acting for external clamping

2.2230

Wedge Swing Clamp

Double-acting, with mechanical lock

2.2240

Wedge Clamp

Double-Acting, for Dies with Tapered Clamping Edge

2.2400

Wedge Clamp

Double-Acting, for Dies with Tapered Clamping Edge

2.2401

Wedge Clamp

With position monitoring (rear side fastening)

2.2402

Wedge Clamp

For Tapered clamping edge, with safety step

2.2403

Wedge Clamp

For tapered clamping edge, with form fit safety step and position monitoring

2.2404

Wedge Clamp

For tapered clamping edge, with locking bolt

2.2405

Wedge Clamp

With locking bolt and position monitoring

2.2406

Wedge Clamp

For tapered clamping edge, with sequence valve control for high temperatures

2.2407

Wedge Clamp

with sequence valve control and safety strap

2.2408

Wedge Clamp

With directional seat valves flanged to the rear serving as control valves

2.2409

Wedge Clamp

For tapered clamping edge double acting, with cooling circuit

2.2410

Wedge Clamp

Single acting for flat clamping edge

2.2450

Wedge Clamp

Double-acting, type A for dies with flat clamping edge

2.2451

Wedge Clamp

Double-acting, type V for dies with flat clamping edge

2.2460

Extending Clamp

Double-acting with mechanical lock

2.2480

Wedge Clamp

electro-mechanical, max. operating force 240 kN for Flat Clamping Edge

5.2670